MG3620 Paper Jam (How To Fix Paper Jam?)
Let’s find out how to fix the MG3620 Paper Jam. The Canon PIXMA MG3620 is a well-known all-in-one printer that uses inkjet printing technology and can be operated remotely.
This adaptable printer offers outstanding convenience and simplicity to fulfill your printing demands. Because it includes wireless functionality, you can now print and scan from anywhere in your home or workplace.
With its exceptional features like Auto duplex printing and Mobile Device Printing, there will be significant time and financial savings.
How Do I Fix The MG3620 Paper Jam?
You must take the paper out of the transport unit, which flips the paper over as it is fed into the printer if you can’t see the paper in the output tray. This is how to accomplish it:
- Unplug the device after turning it off.
- Your pending print tasks will be terminated. Once the jam is cleared, you must reprint.
- Verify that the document cover is closed before setting the machine. Place the device on a broad, flat surface, like a desk. Hold the machine firmly, and don’t strike it against a hard surface when standing.
- Remove any remaining transport unit protection material.
- To open the transport unit, depress the open lever.
- Support the machine with your hand while you open the unit to prevent it from falling.
- Make sure not to let the machine fall as you slowly pull the paper out.
- Return the printer to its normal position after closing the transport unit.
- Replug the device and turn it on.
- Refill the paper and start the printing process again.
If following the instructions does not address your concern, your printer must be serviced to fix the issue.
How To Remove Paper Jam On A Canon MG3620?
The Canon MG3620 occasionally experiences paper jam problems. Sometimes, the blocked paper shreds, making removing it from the paper output slot or the transport unit impossible.
Additionally, the jammed paper likely got lodged inside the device somehow. In such circumstances, you can easily remove the paper using one of the following techniques. Let’s examine various methods for removing a paper jam from a Canon MG3620.
Method-1: Check The Paper Tray To See If Any Papers Are Stuck
Paper could be stuck inside the paper tray, causing the printing issue. In this case, you must carefully check to see if the MG3620’s paper tray has any jammed paper. To complete this work, adhere to the procedures below:
- Step 1: First, turn off the printer to ensure it is protected from harm.
- Step 2: At this point, you must wait for the printer to shut off properly. Now, you must gently open the top of the primary cover.
- Step 3: Be sure to remove the paper tray at this point carefully. Be careful not to push any built-in elements during this procedure.
- Step 4: You must firmly grab the paper and slowly pull the object out of it to remove it. Paper fibers might be dispersed if the paper tears off. The printer unit could be damaged as a result of the same.
- Step 5: Lastly, remove the print head to see if any paper is still inside the machine. To finish this procedure, you must then close the top cover.
- Step 6: Restart the printer to ensure everything operates properly once the stuck papers have been examined.
Try any of the following techniques if this method fails and the problem still exists:
Method 2: Inspect The Output Tray For Papers That Are Jammed
You must check the output tray on this printer after you have confirmed the input tray. To find the output tray, take the steps listed below:
- Step 1: Before you do anything else, switch off this printer and unplug all of its power cords from the back of the machine.
- Step 2: Locate the output tray attached to the printer’s head. After that, carefully remove it from the gadget.
- Step 3: Remove any jammed paper from the output tray if you notice it there. A single sheet should be removed at a time.
- Step 4: In this step, you must take each paper from the printer one at a time before turning off the top of the device.
- Step 5: Finally, reconnect the device’s power cables before turning it on to see if the problem has been fixed.
Use the following techniques if the paper jam problem continues:
Method 3: Verify That Your Printer’s Carriage Can Move Freely
The issue could lead to transportation-related paper jam problems. The carriage could occasionally become immobile or become stuck in one spot.
This will undoubtedly stop the printing process. If so, follow the instructions below to inspect the carriage on this printer and fix the paper jam problems:
- Step 1: Turn off the printer first, then unplug all the power wires attached to the printer’s back.
- Step 2: After cutting all the cords, carefully open the top bar to release the cartridge.
- Step 3: At this point, you must wait until the carriage has cooled slightly before continuing. After it cools, you must move to the center of the area.
- Step 4: You must look for any paper or targets that might limit the carriage. Enter the device through the ink cartridge access gate after checking it.
- Step 5: You must personally exit the carriage at this point. It shifts it toward the left side of the printer if it connects to the right side. If the carriage is still fixed to the left side, try pushing it to the right side and removing any loose papers you may have discovered.
- Step 6: At this point, you must ensure that the carriage pushes freely across the width. The carriage should then be moved first to the left, then to the right.
- Step 7: Close the access door for the ink cartridges. Reconnect all of the power wires that are accessible on the printer’s backside after that.
- Step 8: You can print a few pages to see if the paper jam problem has been fixed. You can use this to determine whether the error is fixed or not.
Try the following approach if the paper jam problem still exists:
Method 4: Check If This Printer’s Paper Feed Rollers Are Clean
The little rubber rollers used to feed paper are shaped like a circle. This rubber feeds the paper more easily into the printer unit. The printing process might stop if these rollers or rubbers became soiled. To clean the paper feed rollers, please refer to the guidelines below:
- Step 1: First, turn off the power wires from the printer’s rear.
- Step 2: Carefully lift the input tray, then glance down at the entire input paper tray. It would help if you located a new paper tray and the printer’s gray paper pick rollers.
- Step 3: Dip a paper towel or dust-free cloth into the filtered water at this point.
- Step 4: Use your fingers to turn the cloth or napkin upward as you gently press them on the roller.
- Step 5: In this step, apply light pressure to the rollers and let them completely dry.
- Step 6: Finally, reattach all of the power cords before trying to print a few pages.
This will enable you to determine whether the paper jam issue was fixed.
Conclusion
The technique to fix the paper jam issue on the Canon MG3620 might be complex. However, attempting each approach, in turn, will unquestionably help you resolve this problem quickly and securely.
Top FAQ’s
Why does my Canon printer always report a paper jam?
A paper jam error could happen if the paper is not feeding correctly. To fix the problem, I advise cleaning the feed rollers. Starting on page 85 of the user handbook, there are instructions for cleaning the feed rollers.
How should my mg3620 printer be cleaned?
Check to see if the power is on. Once the Alarm lamp has flashed twice, immediately remove the pressure on the Stop button. The machine is cleaning the print head. The cleaning will be finished when the ON lighting turns on after flashing.
Why does my printer indicate a paper jam even when everything is free?
Debris, dirt, or dust: A paper jam error can occur if the HP Printer is not cleaned. Therefore, you must check for debris or dust on the device if a paper jam error appears but no paper is stuck. For HP printing devices, we have created step-by-step instructions on how to unclog a paper jam.
What should I do if there is no paper jam, but my printer indicates there is?
There are situations when a paper jam error occurs even when there isn’t any paper jammed (false paper jam). Try printing again after performing a printer reset, which may resolve an erroneous paper jam issue. Disconnect the printer’s power cord while it is still on. Remove the power cord from the outlet.
This is Mohammad Talha, a fervent tech enthusiast with a Computer Science degree, has been reviewing products and assisting the digital community for over 6 years. My passion for technology is matched only by my dedication to helping others navigate the ever-evolving digital landscape.