NZXT Cam Not Detecting Fans [Causes + Fix]
Here I will explain to you why is NZXT Cam Not Detecting Fans. Your monitor shows “CPU Fan Error!” and your computer won’t turn on. Nothing is more annoying than turning on your PC and being greeted by a mysterious error message that prevents you from working or having fun.
Most of the time, you’ll have to manually copy-paste the mistake into Google Search to figure out what’s wrong. However, sometimes the issue is simple to understand and quick to remedy.
The CPU Fan Error seen on Motherboards from ASUS and other Brands fits into both categories in that the cause of it seems evident, but the solution can be more complex.
Even if your CPU cooler is connected and functioning properly, you can still receive this warning.
Additionally, we will discuss the situations in which a straightforward remedy won’t be achievable and what that means for you moving forward.
NZXT Cam Not Detecting Fans
A problem with the device’s physical connection is another frequent cause of non-detection. Shut down the computer, and then test the connection between the motherboard and the device end.
Causes Why NZXT CAM Not Working?
The most frequent causes of NZXT CAM’s failure to launch or display devices are:
- Software-related problems, faulty drivers, or third-party applications that prevent it from starting up are to blame if NZXT CAM doesn’t launch.
- If NZXT CAM doesn’t install, it may be due to incorrect PC settings or damaged data from an earlier version.
- Hardware not supported or connected to the system will not be detected by NZXT CAM. Peripherals not working properly are another big factor in CAM not showing anything.
- If NZXT CAM isn’t displaying FPS, it’s because your OSD settings haven’t been modified in the app.
- If NZXT Cam is not displaying CPU temperature, GPU temperature, fan speed, or lightning, it’s possible that OSD options have been turned off.
The over-clocking tool NZXT CAM can display your current FPS while playing games. You can now utilize the MSI Afterburner FPS counter or the built-in FPS counters in Windows 10.
How To Fix NZXT Cam Not Opening On Windows 11/10 PC?
Using one of these patches, you can solve problems connected to NZXT CAM.
Uninstall CAM Traces And Reinstall
Even though you’ve tried running as an administrator or reinstalling CAM, the NZXT CAM won’t launch. This tool needed to be correctly removed, leaving leftovers on your computer.
Take these actions:
- Using the included uninstaller, remove the CAM software.
- Locate the uninstaller by opening the folder where you installed the CAM. Run it.
- After uninstalling CAM, remove all its leftovers, including Short Cut.
- Remove any “NZXT” or “CAM” files inscribed.
- Remove the NZXT CAM folder from %appdata% using the Windows search bar. (Alternatively, enter the path C: UsersYOUR USERNAMEAppDataRoamingNZXT CAM).
- Locate Tasks in the system32 folder, then delete the CAM files.
- Restart your computer.
- Microsoft has created a tool to ensure and address issues preventing the program from being installed. Run it after downloading it.
- Run the NZXT CAM website after downloading it.
Therefore, you must entirely remove CAM from your system. If you do it, the CAM software won’t have difficulty opening.
Create A Local Admin Account
This solution was offered on a forum where an unidentified person fixed the NZXT CAM won’t load issue. Since installing fresh drivers for his 3080 GPU, he has experienced starting issues. Despite numerous restarts, NZXT CAM will not load.
Solution: The mouse would change to show activity each time I clicked to launch NZXT CAM, and nothing would happen. I followed your advice, then. I made a local administrator account.
I launched the executable after finding it in the program files. As soon as I logged back into Windows, as usual, NZXT CAM began to run. But everything was in order.
That may be because I left it running in the new account. So I restarted the computer, and presto! Everything was back to normal. The lighting and Kracken display are set up properly.
Enable Cam In Windows 10 Startup App
If you have Windows 10’s option disabled, you won’t be able to open CAM. First, confirm that Windows can start up with CAM. Here is how you do it:
- To access settings, press Windows + I.
- From the Windows 10 search bar, select Apps and then look for the “Startup” application.
- Verify that CAM is turned “On.”
- Additionally, check sure CAM is configured to launch with Windows.
Enable On-Screen Display
The on-screen settings are the root of the issue if the NZXT CAM isn’t displaying CPU temperatures. This problem is resolved by altering the OSD settings. Here’s how to go about it:
- Start NZXT CAM.
- Open the OSD settings and switch on the CPU temperature under the Overlay and Mini Mode Tab.
- Click “Apply”
Install The Latest Microsoft .NET Framework
If the CAM software is still not opening, your PC may have an older version of the NET Framework installed. It is a crucial tool that facilitates using other apps on your PC. CAM will only launch if it is present or outdated; thus, you must update it from the official website.
Allow The App In Windows Firewall
According to some users, NZXT CAM was reportedly banned from running by the Windows 10 firewall. Consequently, you can eliminate the error using this technique.
Allowing CAM software to operate on Windows will immediately fix this problem. This is the procedure:
- To access the Control Panel, press Windows + R and type it.
- Then select Windows Defender Firewall under System & Security.
- From the left menu, choose Allow an app or function through Windows Defender Firewall.
- From the list in the following windows, choose CAM and Tik from the Private and Public tab checkboxes.
- To see if it resolved the NZXT CAM not opening issue, click OK and restart the software.
NZXT CAM Not Detecting Kraken
The NZXT Kraken Driver must then be downloaded from their website. If you receive a file in the Zip folder, extract it before selecting “Install” from the context menu when you right-click AseUSB.inf.
Restart your PC now. Examine the USB connection between your motherboard and the CAM Powered Device, and swap the ports if necessary.
Disable Third-Party Antivirus
CAM software can occasionally be prevented from running by antivirus software from a third party. If you have a tool for removing malware like this, you should disable or uninstall it.
The majority of antivirus programs contain built-in options to stop them from running. Additionally, you can add CAM to an allowlist that you create.
Reinstall The Device Drivers
These are typically the out-of-date device drivers that prevent an app from functioning properly.
Simply updating the device drivers will fix it. We advise that you should reinstall the drivers, even if you recently updated them.
Here’s how to go about it:
- Press Windows + R and enter devmgmt. msc and then press Return.
- A device management window with a list of all the devices will appear.
- Expand the list by clicking a device, then use the right-click menu to update or uninstall it.
Restart The Program
Sometimes, the simplest solution to fix CAM won’t function issues is simply restarting the computer.
Windows 10 occasionally prevents the program from operating. Simply killing the process and relaunching the application will solve the issue:
- To launch Task Manager, press Ctrl + Alt + Delete.
- Right-click on the problematic process after selecting it and select End Task.
- Shut down the task manager, and then restart the CAM program.
Conclusion
A motherboard’s CPU fan problem should be relatively easy to diagnose, except for the rare failing of a cooling component or being dead on parcel arrival. If your BIOS is current and your air or AIO cooler is installed correctly, you can resolve the issue “NZXT Cam Not Detecting Fans” quickly.
Frequently Asked Questions
Can NZXT CAM control fans?
Only an NZXT fan controller compatible with CAM can manage fan speeds. Fan speeds for devices connected to devices such as the Smart Device V2, RGB & Fan Controller, Grid V3, Kraken X2 Coolers, Kraken Z3 Coolers, and any of our NZXT N7 Motherboards can be controlled.
Why is Kraken 120 not showing up in CAM?
If you have a Kraken 120 cooler, it may only appear in the twill-only CAM program if a LinkedIn controller or a specialized NZXT RGB connection is found on an NZXT motherboard.
What is the maximum rpm for NZXT fans?
With speeds ranging from 500 to 1500 rpm, this fan has a chamfer design with winglet tip blades to reduce drag and maximize airflow and pressure.
This is Mohammad Talha, a fervent tech enthusiast with a Computer Science degree, has been reviewing products and assisting the digital community for over 6 years. My passion for technology is matched only by my dedication to helping others navigate the ever-evolving digital landscape.